etf

Laboratory for renewable energy sources The electric bicycle MS ENERGY eBike i10 represents a switchable electric bicycle. It can travel up to 50 km on a battery and has three electric speeds. In addition to the electric motor, the bike also has 6 speeds, so you don’t have to turn on the motor, or you […]

Laboratory for renewable energy sources A drone for filming hard-to-reach objects, such as wind turbines, solar panels on building roofs, hydroelectric dams, etc. The mass of the drone is 240 g, the maximum flight time is 31 min, video transmission at a distance of up to 10 km, wind resistance level 5, Ultra-clear 4K video.

Laboratory for electric machines, electric motor drives and electricity quality Multifunctional three-phase power quality analyzer fully compliant with IEC 610000-4-30 Class A standard. Measurement functions: voltage (4-channel), 4-channel current), power (active, reactive, apparent), voltage asymmetry, vibration measurement, harmonics and interharmonics, power factor, energy (active, reactive, apparent), temperature measurement. Power measurement in accordance with IEEE 1459.

High voltage laboratory The test setup is used to test the insulation of equipment with high AC and DC voltages. The test transformer has a maximum output voltage of 125 kV and a power of 20 kVA, AC. Maximum DC test voltage is up to 80 kV, with a current of 3 mA. Contact e-mail:

High voltage laboratory The test setup is used for testing the insulation of high-voltage equipment with lightning and switching impulse voltages of 1.2/50 μs and 250/2500 μs. The impulse generator is three-stage with a maximum output voltage of 350 kV and energy of 4.4 kWs. Contact e-mail: kontakt@etf.ues.rs.ba

Laboratory for electric machines and electric motor drives Test device “Dr. Staiger, Mohilo + CoGmbH ”is intended for testing and verification of torque characteristics of electrical machines. The device consists of a test bench, a load system, and a command and control desk. The tested machine is connected to one of the three measuring shafts

Laboratory for electric machines, electric motor drives and electric power quality Combines the functions of a power analyzer, power quality logger, scope, data logger, and clamp meter in one handy tool Measures AC current to 1400 A RMS and DC current to 2000 A without breaking the circuit Carries the highest safety rating: 600 V

Laboratory for electric machines, electric motor drives and electric power quality Its high infrared resolution images of 19, 200 pixels (160 X 120) offers clear and precise displays of wherever the problem may lie Thermal sensitivity of <0.07°C helps to find the problems faster and easier, a key feature for equipment monitoring An optimized temperature

Laboratory for electric machines, electric motor drives and electric power quality • 3 or 4-wire measurement selectable from menu• No balancing required• Continuous monitoring of interference voltage andauxiliary earth electrode resistance with indicationof limit value violations• Indication is displayed if maximum probe resistance isexceeded at the beginning of the measurement• Voltage measurement with automatic switch-over

Laboratory for electric machines, electric motor drives and electric power quality Reliable, repeatable, accurate device for checking bearings and overall vibration Features innovative sensor design that minimizes measurement variations caused by device angle or contact pressure Provides consistent data quality at both low and high frequency ranges Offers four-level severity scale to assess urgency of