LABORATORY FOR PROCESS ENGINEERING
The test section of this device consists of a classic Venturi tube made of pure acrylic. The piezometers located above the Venturi tubes are connected by silicon tubes with individual points on the tube and serve to determine static pressure. The total pressure in the system is determined by the probe located on the right side of the Venturi tube. The water in the device comes with a hose connector and the flow of water is controlled by the valve at the exit of the analysis section. The height of the device is 0.60 m, width 0.55 m.
The demonstrator (F1-15) is used for direct measurement of static and total pressure along the Venturi tube for different fluid flows.
email: sekretar@tfzv.ues.rs.ba
+387 56 260 190
+387 56 261 072